IWILL dca200, Manual

Page: 76 / 83

Chapter 5 BIOS Setup
76
DCA200-N Series
Over-clocking is not guaranteed. Users must have substantial knowledge
of proper CPU relative to adjusting CPU speeds. Over-clocking should
be done only by experienced engineers who conduct tests.
5.10.1 CPU CLOCK ADJUST Mode
When choosing Plug & Run , the CPU frequency will be detected automatically.
This function will only support DCA200 series, and provides to survey
automatically CPU FSB. Let the O.S may run the stablest condition.
When choosing User Mode , user needs to set CPU frequency manually.
This field allows user to adjust the CPU frequency when CPU CLOCK SETTINGS
on screen.
Options (When CPU external frequency is 100MHz, BIOS will dispaly
the following setting)
400/450/500/550/600/650/700/750/800 MHz
(When CPU external frequency is 133MHz, BIOS will dispaly
the following setting)
400B/467B/533B/600B/667B/733B/800B/866B/933B MHz
1 GHz
5.11 Load Fail-Safe Defaults
When you press <Enter> on this item you get a confirmation dialog box with a message similar