IWILL dca200, Manual

Page: 28 / 83

Chapter 3 Features
28
DCA200-N Series
3.4 Specifications
Processor
Supports two Slot2 connectors with pre-installed URM (Universal Retention Mechanism)
Supports Intel® Pentium® II Xeon™ (Tanner) CPU from 400 MHz to 550 MHz
Supports Intel® Pentium® III (Cascades) CPU from 600 MHz to 733 MHz
Supports both H/W and S/W setting methods on CPU frequency selection
Supports CPU voltage auto detection
Supports adjustable CPU core voltage
C h i p S e t
Intel® i840 AGPset
Supports 100/133 MHz CPU external frequency
Supports a single AGP device (either via a connector or on the motherboard)
Supports AGP2.0 including 4x AGP data transfers and 2x/4x Fast Write protocol
Supports via dual mode buffers to allow AGP2.0 3.3V or 1.5V signaling for AGP
Universal connector
Main Memory
Supports four RIMM sockets
Supports dual Direct RAMBUS Channels operating in lock-step
Supports 300/400 MHz DRDRAM (100/133 MHz FSB)
Supports 256Mb/128Mb/64Mb RDRAM devices
Supports up to 64 Direct RAMBUS devices without using MRH-Rs (Memory Repeater
Hubs for RDRAM devices)
Supports 64M/128M/256M RDRAM modules
Supports memory up to 2G/1G/512M when using 256M/128M/64M technology
Supports ECC memory module (Single bit error Correction, Multiple bit error Detection)
Bus Master IDE
Supports dual channel IDE interface for up to four IDE devices
Supports Ultra DMA Bus Master with 66 MB/s burst data transfer rate
Supports PIO mode 0/1/2/3/4 and Multi-word mode 0/1/2/3/4
Supports HDD/Tape drive/CD-ROM/CD-R/CD-RW/LS120/ZIP drive
Multi-IO
Provides one floppy port to support 1.2M/1.4M/2.8M/3 Mode FDD and QIC-80 tape
drive
Supports two high-speed 16550A serial ports
Supports one ECP/EPP parallel port
Supports one PS2 mouse port
Supports one PS2 keyboard port
Provides one Game/MIDI port to support two joysticks