IWILL dca200, Manual

Page: 48 / 83

Chapter 4 Hardware Setup
48
DCA200-N Series
4.7.10 Wake-On-LAN Connector (WOL)
This connector connects to a plug-in network card, which supports the WOL
technology to powers up the system when a wakeup packet or signal is received
through the LAN card.
a. You may need to enable the “Wake Up by Ring/LAN” feature in the
BIOS setup program.
b. Your system must have a ATX power supply with at least 720mA 5VSB
power.
c. This motherboard only supports the LAN card with a high-active wake
signal.
4.7.11 Wake-On-Modem Connector J47 (WOM)
This connector connects to internal modem cards (PCI or AMR) with a Wake-
On-Modem output to powers up the system when a ringup packet or signal is
received through the modem card.
a. For the external Modems, the Wake-On-Modem is detected through the
COM port.
b. You need to enable the “Wake Up by Ring/LAN” feature in the BIO
setup program.
c. Your system must have a ATX power supply with at least 720mA 5VSB
power.