IWILL dca200, Manual

Page: 67 / 83

Chapter 5 BIOS Setup
67
DCA200-N Series
“Confirm Password” is displayed, re-type your password. The KB Power-
On function will be in effect after you save and exit setup.
To disable a password, bring the cursor to the “Enter” field again, then
press <Enter>. The computer will display the message, “Enter Password”.
Press <Enter>. A message will confirm that the password is disabled.
5.6.9.2 Hot Key Power On
This field specifies key selection for the Keyboard-Power-On hot key.
Options
Ctrl-F1 / Ctrl-F2 / Ctrl-F3 / Ctrl-F4 / Ctrl-F5 /
Ctrl-F6
Ctrl-F7 / Ctrl-F8 / Ctrl-F9 / Ctrl-F10 / Ctrl-F11 /
Ctrl-F12
5.6.9.3 PS2 MOUSE Button Power on
This field specifies key selection for PS2 MOUSE Button Power on.
Options
Left
Right
5.6.10 Onboard FDC Controller
This field enables or disables the onboard floppy controller.
Options Enabled (*)
Disabled
5.6.11 Onboard Serial Port 1 / 2
These fields configure the onboard serial ports. There are several port addresses
and IRQ channels to select from.
Options Description
3F8 / IRQ 4(*) Port address 3F8h, IRQ 4
2F8 / IRQ 3(*) Port address 2F8h, IRQ 3
3E8 / IRQ 4 Port address 3E8h, IRQ 4
2E8 / IRQ 3 Port address 2E8h, IRQ 3
Auto BIOS assigns port address and IRQ channel automatically
Disabled Disables serial port
5.6.12 COM2 Mode Select
This field must be configured in order to use the infrared connector, which supports
infrared wireless transmitting and receiving of data between devices when using the
appropriate application software.
Options Normal (*), IrDA, ASKIR