IWILL dca200, Manual

Page: 70 / 83

Chapter 5 BIOS Setup
70
DCA200-N Series
10 Port address IRQ10
5.7 Power Management Setup
Each power-saving mode has a respective timer. The value of the timer can be assigned or
reloaded and it will count down to zero. When the timer equals to zero, the system will be
forced into the related suspend or power-saving mode. If any predefined signal or event is
detected during the timer counting period, the timer restarts automatically.
5.7.1 ACPI Suspend Type
There are several ACPI modes used to save computer’s energy
S1 (POS) (*)This is the Power-On-Suspend state, the CPU clock will run at
slower speed, when entering the suspend state.
S3 (STR) This is the Suspend-To-Ram state, all system data will be saved
in system’s memory and all devices except the memory will
shut off.
5.7.2 Power Management
This feature allows the user to select the default parameters for the power-saving
mode.
Options Description