IWILL dca200, Manual

Page: 21 / 83

Chapter 2 Overview
21
DCA200-N Series
Chapter 2
Overview
Thank you for purchasing the IWILL DCA200-N motherboard. This operation manual will
instruct you how to configure and install the system properly. It contains an overview about the
engineering design and features of this product. Also, this manual provides useful information
for later upgrades or configuration changes. Keep this for your future reference.
About This Manual
This manual will introduce to the user how this product is installed. All useful information will
be described in later chapters. Keep this manual for future upgrades or system configuration
changes.
Chapter 1 Quick Installation The quick reference for experienced user
Chapter 2 Overview An overview of this motherboard
Chapter 3 Features Information and specifications
Chapter 4 Hardware Setup Information for setting up the motherboard
Chapter 5 BIOS Setup Information for setting up the system BIOS
Chapter 6 Power Installer CD Information for the Power Installer CD
Item Checklist
You should find the following components when opening the box:
[
Ô
] Iwill motherboard
[
Ô
] This operation manual
[
Ô
] One 40-pin/80-thread ATA/66 IDE cable with three heads
[
Ô
] One 34-pin Floppy cable with four heads
[
Ô
] One Iwill Power Installer CD
[
Ô
] Bag of spare jumper caps
[
Ô
] One Custom WTX IO shield
[
Ô
] One CPU terminator card
[
Ô
] Two continuity module (C-Module)
O p t i o n a l
[ ]
Thermal Sensor for HDD
[ ] Thermal Sensor for System
[ ] Iwill SIDE-Pro66 PCI ATA/66 IDE controller
[ ] Iwill SIDE-2930C PCI Fast SCSI controller
[ ] Iwill SIDE-2930CB PCI Fast SCSI controller
[ ] Iwill SIDE-2936UW PCI Ultra Wide SCSI controller
[ ] Iwill SIDE-2935LVD PCI Ultra2 SCSI controller
[ ] Iwill SIDE-DU280 PCI Dual channel Ultra2 SCSI controller
[ ] Iwill SIDE-DU3160 PCI Dual channel Ultra3 SCSI controller