IWILL dca200, Manual

Page: 80 / 83

Chapter 6 Power Installer CD
80
DCA200-N Series
6.2.2 How to make driver diskette
6.2.2.1 Without O.S. installed
This bootable Power Installer CD also allows you to boot up your
system, even when the OS has not been installed. During the boot-up
process, you can perform “IWILL Diskette Creator,” which will
automatically make the driver diskettes you need.
At least one CD-ROM drive and one 1.44M floppy drive are necessary to
make “IWILL Diskette Creator” work properly.
Follow the instructions below to make your own device driver floppy
diskettes if you have a CD-ROM with IDE interface. If you have
already installed SCSI CD-ROM, please make sure your SCSI host
adapter supports bootable CD-ROM, and then proceed directly to
step 8 , and then finish the procedure.
1.First, power-on or “boot” your system.
2.Press <Del> key during boot sequence to enter “ CMOS
Setup Utility”
3.Use arrow keys to select “ADVANCED BIOS FEATURES”
on the menu, then press “Enter.”
4.Select “First Boot Device” and change the default setting to
“CDROM” using Page Up /Page Down key.
5.Press <Esc> key to go back to CMOS SETUP Utility menu.
6.Press <F10> to select “Save and Exit Setup”
7.Press “Y” then “Enter” to complete. Now you are able to
boot up the system from the CD-ROM.
8.Insert the Power Installer CD into the CD-ROM drive and re-
start the computer.
9.IWILL Diskette Creator will now execute automatically for
making your own driver diskettes.
10.Make the desired driver diskettes according to the instructions
displayed on screen.
6.2.2.2 Under windows 98/95/NT
You may just click on the software Make Driver Diskettes Utility
shown on screen, then select the driver you need, follow the messages
shown on screen to complete.
6.2.3 How to install Intel INF Utility (Windows 9x only)
You may just click on the Intel INF Installation Utility shown on screen
that needs to be installed, then follow the prompts to complete setup.