IWILL dca200, Manual

Page: 52 / 83

Chapter 4 Hardware Setup
52
DCA200-N Series
4.7.16.5 Many of the power supply support 110V/220V by a switch
setting. Switch your power supply to the correct supply voltage
(refer to the power supply’s manual).
4.7.16.6 Turn on your system in the following order:
(1) The monitor.
(2) The external devices.
(3) The computer system.
The power LED on the front panel of the chassis will light.
After few seconds, the system will then run power-on tests.
Some additional messages will appear on the screen during
the test. If you do not see anything within 30 seconds from
the time you turn on the power, the system may have failed
a power-on test. Recheck the jumper settings and connections
or call your retailer for assistance.
4.7.17 Power Off Procedures
4.7.18.1 Exit from all the software applications.
4.7.18.2 Shut down your operating system.
4.7.18.3 Switch off the power button. If you are using Windows 95/98,
the power supply should turn off automatically after Windows
shut down.
4.7.18.4 Turn off all the external devices.
4.7.18.5 Turn off your monitor.