Chapter 5 BIOS Setup
72
DCA200-N Series
7 Min / 8 Min / 9 Min / 10 Min / 11 Min / 12 Min
13 Min / 14 Min / 15 Min / Disable (*)
5.7.9 PWR-Off Mode by PWR-BTTN
This field specifies the function of power button.
Options
Description
Instant-Off (*)
When power button pressed, the system turns off
immediately.
Delay 4 Sec.
After the power button has been pressed and held for four
seconds, the system turns off.
5.7.10 Wake up by PCI card
When enabled, you can “wake-up” your system using a PCI rev.2.2 card ,when a
“PME” event occuring.
Options
Enabled
Disabled (*)
5.7.11 Wake up by LAN/RING
When Wake up by LAN function is enabled, the PC can power-on or “wake up”
through LAN (Local Area Network).
When Wake up by RING function is enabled, the PC can power-on through an
external modem connected to your PC.
Options
Enabled
Disabled (*)
5.7.12 CPU Thermal throttling
This field specifies the throttling function of CPU Thermal. When the CPU’s
temperature attain it’s default protection point, the CPU will run slower in
order to descend the heat generation from itself.
Summary of Contents for dca200
