IWILL dca200, Manual

Page: 57 / 83

Chapter 5 BIOS Setup
57
DCA200-N Series
Options Description
EGA/VGA (*) Specifies EGA or VGA adapter
CGA 40 Specifies CGA adapter with 40 column mode
CGA 80 Specifies CGA adapter with 80 column mode
MONO Specifies Monochrome adapter
5.3.7 Halt On
This field determines how the system reacts to errors once detected.
Options Description
All Errors (*) Each time the BIOS detects a non-fatal error, the
system will stop and display an error message
No Errors The system will not stop for any errors that are
detected
All, But Keyboard The system will stop for any errors except keyboard
error
All, But Diskette The system will stop for any errors except diskette
error
All, But Disk/Key The system will stop for any errors except diskette
and keyboard errors
5.3.8 Base Memory
The amount of base (conventional) memory installed in the system. T h e
value of the base memory is typically 640K. This field has no options.
5.3.9 Extended Memory
This is the amount of memory located above 1MB in the processor’s memory address
map. This field has no options.
5.3.10 Total Memory
Displays the total memory available in the system
5.4 Advanced BIOS Features