Chapter 5 BIOS Setup
65
DCA200-N Series
Auto (*)
The BIOS negotiates with device automatically
Mode 0
Use Mode 0 timing to access device
Mode 1
Use Mode 1 timing to access device
Mode 2
Use Mode 2 timing to access device
Mode 3
Use Mode 3 timing to access device
Mode 4
Use Mode 4 timing to access device
5.6.3 IDE Primary Master / Slave UDMA
IDE Secondary Master / Slave UDMA
If you select Auto, the IDE controller uses Ultra DMA 33/66 Mode to access
Ultra DMA-capable IDE devices. Depend on the resent of negociation with
your HDD. The maximum transfer rate of Ultra DMA 66 Mode is 66.6 MB/
sec.
Options
Auto (*)
Disabled
5.6.4 USB Controller
Select Enabled if your system contains USB peripherals.
Options
Enabled
Disabled (*)
5.6.5 USB Keyboard under DOS
Select Enabled if you want to use USB keyboard under DOS
Options
Enabled
Disabled (*)
5.6.6 Init Display First
This item allows you to decide which slot to activate first, either PCI slot or
AGP slot.
Options
PCI Slot
AGP (*)
5.6.7 AC97 Audio/Modem
Summary of Contents for dca200
