Maintenance and adjustment
63
4
spare electrical system fuses.
Electrical system fuses (Fig. 6)
The electrical system fuses are locat-
ed behind the instrument panel left hand
side cover. To remove the cover turn the
three fasteners and lift off the cover.
Fig. 6:
Radiator cap (Fig. 7)
Warning
High pressure steam and hot water.
Remove the filler cap with extreme care.
To remove the radiator cap press the
radiator cap down and turn it slowly to al-
low pressure to escape before removing it.
This is particularly important if the engine
is hot.
Fig. 7: Radiator cap
Fuel filler (Fig. 8)
Warning
Do not fill when engine is hot or
running.
To remove the fuel filler cap, turn anti-
clockwise.
Fig. 8: Fuel filler cap
Grease lubrication (Figs. 9 to
16)
Grease points (Figs. 9 to 16)
Every 100 hours (Figs. 9 to 13)
Figure 9. Front wheel hubs, two wheel
drive only -Two points.
Figure 10. Front axle king pins, two
wheel drive only - Two points.
Figure 11. Front axle pivot, two and
four wheel drive:
Summary of Contents for ITM 800
