Maintenance and adjustment
90
4
cated behind the left hand side cover.
Fig. 63:
The decals showing the circuits that
have fuses and their value in amps are
fixed on the back of the left hand instru-
ment panel side covers (See Table 4-11).
On cab tractors, the additional fuse
box for the cab are situated inside of cab-
in.(Fig. 63).
The spare fuses, tweezers and decal
showing the circuits for cab tractors is
located behind the right hand instrument
panel side cover (Fig. 64), see table 4-11.
Main fuse box (1 Fig. 62)
Fuse
No.
Rating Colour
Circuit
1
25A
Clear
Thermostart
2
5A
Brown Front wheel
drive,
instrument and
speedometer
3
10A
Red
Lights
4
15A
Blue
Hazard warning
and horn
table 4-11
Fig. 64:
Batteries (Figs.65 and 66)
Check the battery(ies) every 250
hours
Warning
The battery contains a sulphuric acid
electrolyte which is a corrosive substance
and must be treated with great care:
1. Corrosive substance.
2. Irritating to eyes and skin.
3. Keep out of the reach of children.
4. Avoid contact with skin and eyes.
5. Wear suitable protective clothing,
gloves and eye protection.
6. In case of contact with eyes rinse
immediately with plenty of water
and seek medical attention.
7. If swallowed seek medical advice
immediately and show label.
8. When charging the battery, charge
in a well ventilated place and AL-
WAYS switch off at the mains be-
fore disconnecting the terminals.
Check the condition of the battery(ies)
ensuring that the electrolyte is up to level.
Clean the top of the battery, check that the
terminals are tight and smear them with
Summary of Contents for ITM 800
