Itm ITM 800, Operating Instructions Book Manual

Page: 65 / 118

Maintenance and adjustment
59
4
Carry out the following tasks:
See page
EVERY
**
Flex
100
hours
250
hours
500
hours
1000
hours
Differential lock
Check and adjust the differential lock. 79
34
Four wheel drive
Check the four wheel drive front axle axle and epicyclic
oil levels and top up..
79 35
WHEELS AND TYRES
Check all tyre pressures. 82 37
Check wheel nut tightness. 83 38
CAB
Check the windscreen washer bottle and top up. 80 39
Remove and clean the cab air filter. 80 40
Check operation of air conditioning system. 81 41
GENERAL Oil can lubrication. 56 43
Service symbols and numbers and lubricating points of the tractor are shown on the next page.
Note
** Flexible maintenance times vary according to individual conditions of operation. You must establish your own times for ser-
vicing “flexible” items. An average interval time checking these items is at very fuel fill up. Where tractors are used in operating
areas of arduous work cycles coupled with lack of maintenance care and low specification fuel and oil, certain intervals may need
to be shortened, such as oil and filter changes and greasing.