Itm ITM 800 Operating Instructions Book Manual Download | Manualshive

Page: 3 / 118

background image

To our customer

Congratulations on your selection of an ITMCo product. We believe you have exercised ex-

cellent judgment in the purchase of your ITMCo farm tractor. We are most appreciative of your
patronage.

The present manual (Operator Instruction Book) has been compiled by Iran Tractor Manufac-

turing Company (ITMCo) and has been intended for tractor owners and drivers operating ITM 800
(2WD/4WD) tractors. It supplies in detail the most essential information about your farm tractor.
This manual must always be kept with the tractor and it must be made available for the operator
of the tractor at all times. Before using the tractor please READ this manual carefully and LEARNS
how to use it correctly and safely as your safety is of primary concern to the manufacturer. If you
decide to sell your machine, make sure to pass this manual to the next owner.

Your dealer will be happy to acquaint you with the operation and maintenance instructions

given in this manual, and to instruct you in the proper and varied applications of this machine and
assist you in resolving your problems in the cases that you strike a problem not covered by this
manual. Call on him at any time when you have a question, or need equipment for the use of your
tractor.

All information, illustrations and specifications in this manual are based on the latest informa-

tion available at the time of publication. The right is reserved to make changes at any time without
notice without incurring any obligation to make such changes to products manufactured previ-
ously. ITMCo accept no responsibility of changes which may be evident in the actual specifications
of its products and descriptions contained in this publication.

The tractor at your possession is designed to function properly solely under normal conditions

in agricultural operations («intended purpose»). However, its use in any other way is considered
as contrary to the intended purpose and of detrimental effects to the tractor. In other words, if
the tractor is used under abnormal conditions (e.g. deep water or paddy fields) ITMCo shall refuse
to accept any liability for any damage or injury resulting from misuse and these risks must be
avoided by the user.

www.itmco.ir

III

«
1
2
3
4
5
...
»

Summary of Contents for ITM 800























































































































Reviews:

No comments

Related manuals for ITM 800

HiTech T Series

Brand: Valtra Pages: 31

Techstar CVT MT525B Series

Brand: Challenger Pages: 248

Brand: Agria Pages: 76

Brand: Broan Pages: 36

AutoBoom Rogator 54 Series 1997+

Brand: Raven Pages: 40

Brand: Troy-Bilt Pages: 36

Brand: Yanmar Pages: 6

Sovereign 570-3212

Brand: Simplicity Pages: 40

Brand: Dieci Pages: 272

Brand: AGKNX Pages: 16

Brand: Great day Pages: 3

Brand: Valtra Pages: 370

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands