ISHIDA BC-4000TEC, User Manual

Page: 6 / 128

page iv BC-4000TEC User’s Manual No. JBAW07EBC-4000TEC
LEVEL ADJUSTMENT
Check that the scale is level.
•
Always ensure that the machine is level. If the machine is not level, weighing may not be
accurate.
•
Adjust the machine to a level position using the four height adjustment feet located on the button
of the machine, until the bubble is completely centered in the round level indicator.
WARNING SYMBOLS
This machine is manufactured for use according to proper procedures by qualified service personnel
and only for the purposes described in this manual.
The warning symbols in this manual and warning stickers affixed to the machine itself are divided into
three categories depending on the level of danger or seriousness of potential injury. The definition for
each of these warnings and precautions are shown below. Failure to heed these warnings and
precautions may result in bodily injury or damage to the machine.
Indicates information that, if not heeded, is likely to result in loss of life or
serious injury.
Indicates information that, if not heeded, could possibly result in loss of life
or serious injury.
Indicates information that, if not heeded, could result in relatively serious
or minor injury, damage to the machine, or faulty operation.