ISHIDA BC-4000TEC, User Manual

Page: 47 / 128

Chapter 4 TOTAL MODE
4.8 ERROR TOTAL (F07)
1 [F01 Screen]
Make sure that “Daily Total” screen (F01)
appears on the display.
Otherwise, access this screen by referring
to Section 4.1: Total Mode Entry/Exit.
2
[Error Total]
Press the [
↓
] key six times, or key in “7”
and press the [
↓
] key to access “Error
Total” screen (F07).
or
d
3 [Periodical Total Print]
Press [ENTER] key to proceed to “Error
Total Print” screen (F07-01).
Press the [PRINT] key to issue an error
total label.
•
Printing starts from the first PLU number
with total data.
•
To stop printing before completion, press
the [ZERO] key.
Note: If the Total Report on labels contains
many items, do not thread paper on to
the winding bobbin. Allow labels to
remain on backing paper.
d
d
4
[F01 Screen]
Press the [END] key to return to the F01
screen.
d
5 [Total Mode Exit]
To exit Total Mode, press the [MODE] key.
The initial display will appear.
d
BC-4000TEC User’s Manual No. JBAW97EBC-4000TEC 4-15