ISHIDA BC-4000TEC User Manual Download

Page: 110 / 128

Chapter 5 REGISTRATION MODE

FILE DELETE (P40-00-01)

[P40 Screen]

Make sure that “Nutrition Labels” screen
(P40) appears on the display.

Otherwise, enter this screen by referring to
Section 5.1: Registration Mode Entry/Exit.

[Nutrition Panel Number]

Press the [ENTER] key to enter “Panel No.”
screen (P40-00).

Key in a panel number to be deleted (6 digits)
and press the [PLU] key.

Panel number

[Serving Size]

P40-01

Enter the Serving Size using alphanumeric
characters (Max. 10 char.) and press
[ENTER] to record setting.

Serving size

[Nutrition Delete]

Press the [DELETE] key to move to “Nutrition
Delete” screen (P40-00-01)..

[Executing Delete]

Press the [DELETE] key to execute deletion,
then, a buzzer will sound.

Note: When canceling the deletion, press the

[ENTER] key.

[Return to Nutrition Panel Number]

Key in a panel number (6 digits) and press
the [PLU] key to continue with more deletions
or to add additional Nutrition files.

Panel number

5-58

BC-4000TEC User’s Manual No. JBAW97EBC-4000TEC

Summary of Contents for BC-4000TEC

































































































































Search results

Summary of Contents for BC-4000TEC

Reviews:

Related manuals for BC-4000TEC

Brands by name

Popular brands

ISHIDA BC-4000TEC, User Manual

Search results

Summary of Contents for BC-4000TEC

Reviews:

Related manuals for BC-4000TEC

Brands by name

Popular brands