ISHIDA BC-4000TEC, User Manual

Page: 101 / 128

Chapter 5 REGISTRATION MODE
5.20 DEPARTMENT CODE/NAME (P27)
Departments are used to link similar products together into a category for reporting purpose.
The following steps are used to program a name for the reference code entered when PLUs are
programmed.
1
[P27 Screen]
Make sure that “Department Code/Name”
screen (P27) appears on the display.
Otherwise, enter this screen by referring to
Section 5.1: Registration Mode Entry/Exit.
2
[Key In Department Code]
Press the [ENTER] key to enter “Key In
Department Code” screen (P27-00).
Key in a department code and press the
[PLU] key.
Note: 1 to 9 can be programmed.
d
d
Department code
3 [Department Name Edit]
Press the [ENTER] key to enter “Edit Mode”
screen (P27-01).
d
d
Refer to Chapter 6 for editing a text.
4 [Return to P01]
Press the [END] key to return to the P01
screen.
d
5 [Registration Mode Exit]
To exit Registration Mode, press the [MODE]
key.
The initial screen will appear.
d
BC-4000TEC User’s Manual No. JBAW97EBC-4000TEC 5-49