CNC Base machinery / CNC machinery: Type FlatCom
Assembly instruction / Operating instruction for FlatCom Series M, L and XL
page 15
5 Installation and connection of the CNC machine
5.1
Space requirements
The required space for the machine is limited to the outer dimensions of the machine, the
controller cabinet and the CNC control panel as well as enough space in front or side of the
machine to operate it and to be able to set up. The two-part sliding door of the machine
hood (
important for FlatCom series M only
) opens as downward as upward, so you need
additional space above the machine.
The space requirements for FlatCom Series L and XL are shown in the
drawings in section 12.2 (Series L) resp. 12.3 (Series XL).
Space requirement FlatCom 20
Space requirement FlatCom 30
Operating position
Operating position
