CNC Base machinery / CNC machinery: Type FlatCom
Assembly instruction / Operating instruction for FlatCom Series M, L and XL
page 26
The cover control (as a part of SCM) monitors the sensor and controls the actuator (
safety
interlock
) for cover lock / unlock:
Sensor function of
safety interlock
:
1. Cover closed / open
2. Cover locked / unlocked
Actuator function of
safety interlock
:
Cover lock
How to do cover unlock manually ?
For special cases (e.g. door lock defect or loss of power supply voltage
of the machine) you can use the triangular key (enclosure of the CNC
machine) to open the door / cover lock manually.
1.
Switch off the machine.
2.
Turn the triangular key
– without
using great force- a half turn to the
left and open the door.
The servo motors of the
machine are not powered.
3.
Turn the triangular key back to the
right.
In the state
safety interlock manually unlocked
you must not operate the machine.