CNC Base machinery / CNC machinery: Type FlatCom
Assembly instruction / Operating instruction for FlatCom Series M, L and XL
page 39
9.2.4 Lubrication of the Y axis
FlatCom: Grease nipples at the Y axis
At the Y axis (this axis carries the X
axis and the Z axis, mounted to the X
axis) you can find the grease nipples
on the right side, seen from the
operating position. This place can be
reached from the operating position
when the door / cover is open.
.
Use the grease nipples
for the Y axis central lubrication.
Put the grease gun over the viewable
and accessable grease nipples and
press the grease gun.
Also have a view at the following
detail picture.
FlatCom 20/30/40/50: Grease nipples at the Y axis (detail picture)
