CNC Base machinery / CNC machinery: Type FlatCom
Assembly instruction / Operating instruction for FlatCom Series M, L and XL
page 34
7.1
Dust extraction (optionally)
For integration the dust suction into your machine
(in the case of retrofit) please use the
Assembly instruction
for this accessory.
7.2
Tool changer (standard accessory or optionally)
The tool changer (in case of standard
accessory) is assembled and connected
primed factory-made.
The operation air pressure is > 7.5 bar.
The tool length measuring sensor (in case of
standard accessory) for automatically tool
length measurement before or behind the tool
change is mounted on the right front side of
the clamping plane.
For setup the tool changer system
including tool length measurement please
pay attention to the operating instruction
manuals for ProNC / Remote.
Those manuals are stored in PDF format on
the installations CD resp. the delivered USB
memory stick.
