CNC Base machinery / CNC machinery: Type FlatCom
Assembly instruction / Operating instruction for FlatCom Series M, L and XL
page 2
About this manual
Used shortcuts
MD
Machinery Directive 2006/42/EC
SCM
Safety Circuit Module
Used symbols
You will find different symbols in this manual that signalizes important information/ facts and
danger.
Warning!
This symbol indicates dangers that cause damages for person’s health,
physical injury or death.
Warning! Dangerous voltage!
Warning of danger from electricity. Ignoring can lead to serious injury or
death.
Attention!
This Symbol indicates important notes. Ignoring this symbol leads to
damages and malfunctions of the machinery.
Information:
This symbol indicates important information and notes.
Observe the safety instructions
Before you put into operation the CNC machine / CNC base machine FlatCom, work
with the machine or make additions or changes to/with the wiring of the machines
electrical control cabinet / in the housing of the machine, make sure to read
carefully:
the safety instructions in this manual (Chapter 3) and
the safety instructions for DC / AC Power amplifiers in the Operating manuals for
Servo positioning modules with CANopen Interface /1.1/ resp. /1.2/
This Operating instruction has to be found near the CNC machine, so it has to be
guaranteed that the user has always access to the information inside it.
