CNC Base machinery / CNC machinery: Type FlatCom
Assembly instruction / Operating instruction for FlatCom Series M, L and XL
page 33
7 Accessories
Matching for each CNC machine, you can order the following accessories:
clamping set (clamp lever SH1,SH2, 2 stop rails, hexagon socket wrench)
additional mounting material for T-groove panel
bench vise 1, 2
additional collet chucks for working spindle
tool kit cutter, driller, graver
three different tool changers (linear, direct or round changer) with high frequency main
spindle drive, option: length measurement button
rotation axis(axes)
main spindle drive iSA 500, 750, 900
working spindle UFM 500, UFM 1050
vacuum clamping system
isel-Vakufit
pneumatics accessories
cold air cooling
isel-CoolMin:
cooling unit with cold air nozzle (up to -20°C)
exhaust unit
industrial vacuum cleaner
engraving spindle
diamond engraving head
spray-/cooling unit, cooling medium HL4
isel
-special grease for central lubrication
o
fat cartridge:
article number: 299032 0002
o
greaser:
article number: 299032 0003
CAD/CAM software isyCAD/CAM 2.5, Galaad/Kay/Lancelot, ProNC /6/, Remote /7/
accessories
air pressure
air consumption
pneumatic vacuum pump
4 - 6 bar
100-150 l/min (1 nozzle)
cold air nozzle
3 - 10 bar
100-151 l/min
cover of the tool changer
3 - 6 bar
impulse
milling spindle with automatic tool change
> 7.5 bar
impulse
on the milling spindle mounted swivel unit for
exhaust (specially for woodworking)
2 bar
impulse
The necessary software for tool changing inclusive tool length
measurement is a part of the control- and programming software
Remote / ProNC.
Look at all accessories for a professional installation and note the
applicable standards and safety regulations.
Information for compressed air connection of accessories:
To use the optional vacuum clamping system or the tool changer and collets of
the working spindle it’s necessary that the location of the machine has a
compressed air connection.
