CNC Base machinery / CNC machinery: Type FlatCom
Assembly instruction / Operating instruction for FlatCom Series M, L and XL
page 19
5.4
Enclosure
5.4.1 Enclosure with sliding door and safety interlock on CNC machinery
CNC machinery of type FlatCom have a homogeneous machine frame, e.g. the enclosure
is not removeable.
The transparent panes (material: polycarbonate or PETG) mounted in the machine frame
resp. in the door ensure during operation of the machine (setup or working process)
protection against moving machine parts as well as eventually thrown work piece
fragments from the work area.
You are not allowed to put a CE marked CNC machine into operation if
the enclosure is not complete, intact or the polycarbonate resp. PETG
panes are damaged.
5.4.2 Mounting of suitable protective measures at CNC base machinery
The delivered CNC base machinery
without
safety door / hood resp.
without
in the
machine frame fixed transparent panes are
partly completed machinery
for the purpose
of the directive 2006/42/EC. They are delivered without a CE marking.
It applies the declaration of incorporation
and the assembly instruction.
You are not allowed to put the delivered CNC base machine into
operation if you have not mounted
appropriate
protective measures.
As the operator of the CNC base machine, you are responsible for
taking appropriate protective measures based on your risk assessment
to comply the requirements for the machine according to Machinery
Directive 2006/42/EC.
