CNC Base machinery / CNC machinery: Type FlatCom
Assembly instruction / Operating instruction for FlatCom Series M, L and XL
page 20
5.5
Cabling and compressed air connection
The CNC machine is controlled by a control PC /3/ and a power electronics for the servo
motors (motor drives /1.1/ /1.2/). The complete control
– integrated in a control cabinet /5/ –
is completely cabled with the axes and electrical components of the machine.
The wiring diagrams reflecting cabling of components are part of the machine
documentation /5/.
The mains plug of the control cabinet is to be plugged first if the machine is ready for initial
operation.
accessories
air pressure
air consumption
pneumatic vacuum pump
4 - 6 bar
100-150 l/min (1 nozzle)
cold air nozzle
3 - 10 bar
100-150 l/min
cover of the tool changer
3 - 6 bar
impulse
milling spindle with automatic tool change
> 7.5 bar
impulse
on the milling spindle mounted swivel unit for
exhaust (specially for woodworking)
2 bar
impulse
Information for compressed air connection of accessories:
To use the optional vacuum clamping system or the tool changer and collets of the
working spindle it’s necessary that the location of the machine has a compressed
air connection.
