CNC Base machinery / CNC machinery: Type FlatCom
Assembly instruction / Operating instruction for FlatCom Series M, L and XL
page 18
5.3
Put up the CNC machine
The clamping / processing area of the CNC machine and all axes are aligned precisely at
right angles from the factory.
Never loosen the fastenings of the axles or the mounting bracket, in
which the transverse axis (X axis) is mounted. Otherwise, the machine
must be re-measured by a technician from manufacturer isel Germany
AG.
Place the machine on a plane and solid
area. You can compensate the
unevenness of the floor / table with the
adjustable feet. For precise alignment
of the machine you need a spirit level
with an accuracy of at least 0.1 mm / m.
Save the height of the machine feet
with the lock nut.
For safe installation of your new CNC machine on site, we offer the following service:
CNC base machine / CNC machine measuring / calibration with laser interferometer
at the customer / end-user site (article number: 991300 0001).
Picture: Laser measurement of an isel base machine in plant Dermbach in Thuringia
