CNC Base machinery / CNC machinery: Type FlatCom
Assembly instruction / Operating instruction for FlatCom Series M, L and XL
page 12
4 Scope of delivery / distribution state
4.1
Standard scope of delivery
The standard scope of delivery regarding CNC machine / CNC Base machine contains:
Aluminium base frame with
o
enclosure (clear panes, material: Polycarbonate) and (perpendicularly moveable) single piece
sliding door (for CNC machine only, not for CNC base machine)
o
machine table (mounted on the Y axis) with a T-Groove plate for clamping the work piece
Drive axes X, Y, Z including mechanical or magnetic end switches and position
feedback controlled Servo motors
CNC control panel with TFT monitor (Touchscreen), keyboard, mouse or trackball and
operation elements
Control cabinet including:
o
Mains power plug, mains line, net input filter
o
Main switch, lockable in OFF state due to EN 60204-1 (part 1)
o
Servo motor power amplifiers
o
PC based CNC Controller (CAN-PC or Industry-PC)
o
System module ISM10 (Safety module, CAN I/O module, 24 VDC power supply)
Machinery documentation with the following parts:
o
This Assembly instruction for CNC base machinery / Operating instruction for CNC machinery
o
Operating instruction for system module ISM10, Servo motor power amplifiers iMD10 / IMD20 or
IMD40, PC based CNC Controller iSR20 or iSR30 and CNC control panel
o
wiring diagram with part lists
The control software ProNC /6/ or Remote /7/ including CAN CNC Motion
Control Software is completely installed on the control PC. The CNC
machine was tested factory-made using this software.
The declaration of conformity for CNC machinery is only valid if the CNC
machine is used with this control software (ProNC version 1.45.6.1 or
newer resp. Remote version 1.45.6.1 or newer).
For Back Up the control software ProNC / Remote is stored on CD-ROM
or USB memory stick for the purpose of reinstallation (Setup).
The user is responsible for archiving all his application programs (ISO,
PAL, CNC or NCP format) on USB memory stick.
The current scope of delivery of your CNC machine is defined in the
packaging note.
