CNC Base machinery / CNC machinery: Type FlatCom
Assembly instruction / Operating instruction for FlatCom Series M, L and XL
page 51
13.2
Declaration of Incorporation for partly completed Machinery
Declaration of Incorporation corresponding Machinery Directive 2006/42/EU, Annex II B
The manufacturer
isel Germany AG
Bürgermeister-Ebert-Straße 40
D-36124 Eichenzell
declares hereby, that the following product
Product designation:
CNC-Base Machine (partly completed) FlatCom
Types:
FlatCom Series M,
article number: 2750x2, x=2,3,4,5
FlatCom Series L,
article number: 2750x2, x=6,7,8
FlatCom Series XL,
article number: 27455x 101y, x=2,3,4,5,6 y=1,3,4
conforms to the safety and health requirements of the
Machinery Directive 2006/42/EU, Annex I
– including
those at the time of declaration current alterations.
Also the following EU Directives have been applied:
EMV Directive
2004/108/EU
Low Voltage Directive
2006/95/EU
The following harmonized Standards have been applied:
EN 349:1993
Safety of machinery
– Minimum distances to avoid bruising of parts of the
body
EN ISO 12100-1:2003
Safety of machinery
– fundamental terms, general principles of design – Part
1: Basic terminology, methodology
EN ISO 12100-2:2003
Safety of machinery
– fundamental terms, general principles of design – Part
2: Technical principles
EN ISO 13850:2008
Safety of machinery
– Emergency-Halt – Design guidelines
EN 14121-1:2007
Safety of machinery
– Risk assessment – Part 1: Guidelines
EN 60204-1:2006
Safety of machinery
– Electrical equipment of machines,
Part 1: General requirements
The
technical documentation
for this
partly completed
machine was created corresponding Annex VII Part
B. The manufacturer obligates to provide the technical documentation in electronic mode on demand of
authorized governmental agency.
Representative
for composition of technical documentation is:
Helmut Danz
The product (partly completed machine) is provided for integration in a machine or to be bonded with other
partly completed machine in sense with
Machinery Directive 2006/42/EU
, Article 1, Chapter (1), Character a.
The partly completed machinery must not be put into service until the final machinery into which it is to be
incorporated has been declared in conformity with the provisions of
Machinery Directive 2006/42/EU.
Place, Date:
Dermbach, 4.01.2010
_____________________________
Werner Kister, Managing Board
