4
Maintenance and adjustment
81
the loadings are not exceeded.
Fig. 52:
Front track adjustments
Two wheel drive (Fig. 53)
Note
The track settings are based on trac-
tors fitted with 7.50-16 or 10.0-16 front
wheels, due to the variation of tyre sizes
and axle height the actual track setting
may vary slightly by 25 mm (1 in) to
those published.
Caution
The two maximum track positions
are for light work only.
Two types of adjustable front axle can
be fitted to these tractors. They have ei-
ther two or three bolts securing the slid-
ing members of the axle (1 Fig. 53). The
adjustment procedure is the same for both
types. The front wheel track is adjustable
in seven increments as shown in table
4-10.
Fig. 53:
1
2
1365 mm
1473 mm
1575 mm
1676 mm
1778 mm
1880 mm
1975 mm
Table 4-10
Summary of Contents for ITM 475
