3
Tractor operation
50
threads of bolts.
3. Put the bracket behind of weights and
tight bolts. Then put the bolt in the
weight center hole and tight that.
4. To remove the weight, slack the weight
center hole and bracket bolts, remove
them and pull downwards on the frame
and lift the weight off the frame.
Roll-over protection structure
(ROPS) safety frame (Fig. 32).
Warning
On tractors fitted with a ROPS safety
frame the following safety precautions
must be strictly observed:
1. Maintain the safety structure in the
correct upright position at all times.
2. Use a seat belt at all times and keep it
snugly adjusted.
3. Do not slacken or remove bolts, do not
weld, drill, bend or straighten a dam-
aged safety structure. To do so reduc-
es the protection it offers.
4. If the tractor is overturning, hold on
to the steering wheel. DO NOT leave
the seat.
Fig. 32: Roll-over protection structure
Summary of Contents for ITM 475
