Iran Tractor ITM 475, Operators Instruction Book

Page: 17 / 118

General information
1
10
When making repairs or adjustments it
is recommended that you consult ITMCO
Dealer, and have the work carried out by
trained personnel.
Fig. 18: Services and maintenance.
General
Warning
DO NOT use the tractor hydraulics
as a jack or hoist when working on the
tractor or an implement.
The implement and/or tractor must be
supported on suitable blocks or stands,
NOT a hydraulic jack.
Check all nuts and bolts periodically for
tightness, especially wheel hub and rim nuts.
Safety before operating
Caution & warning decals
Read and understand all warning de-
cals. The position of all decals is shown
on pages 16 and 17.
It is good practice to re-read these
safety notes and all cautions and warn-
ing decals regularly. Careful operation can
avoid accidents.
A defective tractor can injure you and
others. Do not operate a tractor which is
detective or has missing parts. Make sure
that the maintenance procedures in this
operator’s book are completed before us-
ing the tractor.
DO NOT leave the tractor unattended
with the engine running.
Service the tractor in safety
DO NOT service the tractor while the
engine is running or hot. or if the tractor
in motion.
Before making adjustments or servic-
ing the electrical system, disconnect the
battery cables (negative (-) cable first).
If either ROPS or a cab is fitted to the
tractor it is recommended that a seat belt
is fitted also and used correctly adjusted,
at all times. This equipment is available
through ITMCO Dealer. DO NOT use a seat
belt if operating without ROPS or a Cab.
Falling Object Protection (FOP)
Observe all recommendations and
instructions regarding the fitting of
Non-safety sunroofs which are used as
SUNSHIELDS ONLY and do not afford the
operator protection from falling objects.
Fig. 17: FOP