Iran Tractor ITM 475, Operators Instruction Book

Page: 46 / 118

3
Tractor operation 39
Lever positions:
Selector control lever (1) moved to for-
ward or ‘B’ position.
Position control (2), fully up in ‘Trans-
port’ position.
Response control (3), In the Slow’ po-
sition.
Operate the hydraulics using the draft
control lever (4).
Fig. 8: In ITM 475
2
1
3
5
4
Starting work:
Push the draft control lever down until
the implement reaches the required depth.
Set the adjustable stop (5) in line with the
lever.
In work:
The draft control lever can be moved
slightly to suit varying soil conditions.
Set the response control towards slow
but in a position to allow adequately fast
entry into work. If the implement moves
up and down erratically turn the response
control towards ‘Slow’.
Fig. 9: In ITM 485
2
4
1
5
3
Leaving work:
Pull the draft control lever up.
Position control (Figs. 10 and
11) inner lever - red sector.
Type of work:
Operation which requires the imple-
ment to be kept at a constant height above
the ground.
Fig. 10: In ITM 475
2
1
3
6
4
5
Lever positions:
Selector control (1), lever moved to
forward or ‘B’ position. Draft control (2),
fully up position. Response control (3), in
the Slow’ position. Operate the hydraulics
by using the position control lever (4).