Iran Tractor ITM 475, Operators Instruction Book

Page: 98 / 118

4
Maintenance and adjustment
91
Driving and work lights (Figs. 68 to
72)
Figures 68 to 72 illustrate the re-
placement of the driving and working light
bulbs. Before changing a bulb, turn off the
respective switch.
To change a bulb:
1. Switch off the light.
2. Loosen the screws and remove the
cover or lens.
3. Remove the bulb from its fitting.
4. Fit a new bulb, refit the cover or lens
and tighten the screws.
Caution
Plough and work lights can have hal-
ogen bulbs. Never touch a halogen bulb
with the fingers. Natural moisture in the
skin will cause the bulb to burn out when
the light is switched on. Always use a
clean cloth or tissue when handling halo-
gen bulbs.
Fig. 68: Rear and direction indicator
light
Fig. 69: Side and direction indicator light -
Footstep
Fig. 70: Side and direction indicator light -
Cab
Fig. 71: Number plate light