4
Maintenance and adjustment
60
two fasteners in the left and right hand of
the tractor and lift off the cover.
Fig. 5:
Radiator cap (Fig. 6)
Warning
High pressure steam and hot water.
Remove the filler cap with extreme care.
To remove the radiator cap press the
radiator cap down and turn it slowly to al-
low pressure to escape before removing it.
This is particularly important if the engine
is hot.
Fig. 6: Radiator cap
Fuel filler (Fig. 7)
Fig. 7: Fuel filler cap
Warning
Do not fill when engine is hot or
running.
To remove the fuel filler cap, turn anti-
clockwise.
Grease lubrication (Figs. 8 to
15)
Grease points (Figs. 8 to 15)
Every 100 hours (Figs. 8 to 12)
Figure 8. Front wheel hubs, two wheel
drive only -Two points.
Figure 9. Front axle king pins, two
wheel drive only - Two points.
Figure 10. Front axle pivot, two and
four wheel drive:
A. Two wheel drive - One point
B. Four wheel drive - One point
Figure 11. Steering ram pivot pin - One
point.
Figure 12. Lift rods and levelling box -
Three points.
Summary of Contents for ITM 475
