Removing Headlight
1.
Remove rear and centre shrouds. See
and
6.8.2 Replacing Centre Shroud,
2.
Take exact note of positions of all cables and sockets
that cables are connected to. Mark connectors and
sockets or take a photograph.
3.
Open cable clamps (1), remove all tie wraps and pull
cable out of mobility device.
4.
Disconnect cable of affected headlight from light board
(2).
Fig. 6-88
5.
Loosen screw (1) and remove headlight from holder.
6.
Replace headlight.
Fig. 6-89
Installing Headlight
1.
Install parts in reverse order.
2.
Install cables carefully and secure them with cable
clamps and tie wraps.
3.
Tighten screws finger-tight.
4.
Adjust headlight roughly using ratchet plate as a guide.
The user can carry out final adjustment following user
manual.
5.
Test all functions.
6.11.5 Replacing Headlight (LED on Modulite)
•
4 mm Allen key
•
Oblique pliers
•
Tie wraps
1533060-N
79
Summary of Contents for Storm 4 Series
