Invacare Storm 4 Series, Service Manual

Page: 21 / 102

Service
With True Track Plus Motor
Fig. 6-3
Fig. 6-4
E
CLAM module
(optional) It controls powered adjustment options. The CLAM module is mounted under the seat frame.
F True Track Plus
power module
(optional) It is at the rear of the battery box.
6.4 Troubleshooting
6.4.1 Operational Faults
Proceed as follows if you have any problems:
1. First assess the possible cause of the problem using the following table.
2. Check the remote status display. Evaluate the flash error code.
3. Carry out the necessary checks and repairs as recommended in the following table.
The various power modules can be fitted in connection with different remotes in the mobility device. Rectification of
operational faults depends on the power module fitted. The power modules used are described in the corresponding
controls manual.
The tables for rectification of operational faults listed in the following chapters are only an excerpt from the original
manufacturer's manuals. You can obtain the original manuals from Invacare.
6.4.2 Drive fault diagnosis
Problem Other symptoms Possible cause Solution Documentation
The remote status
display illuminates
normally and shows
an error code. Drive motors
disengaged Engage drive motors See corresponding
remote manual
Remote status display
does not illuminate Batteries defective Replace batteries
See 6.10.4 Removing
Batteries, page 75
Completely discharged
battery Pre-charge batteries See user manual
Power supply to
remote interrupted Check main fuse
See 6.9.14 Main Fuse,
page 67
Check cables between
modules for loose
connections or
damage See 6.9.15 Cables,
page 68
Remote defective Replace remote See corresponding
remote manual
Mobility device will
not start
Remote status display
flashing Various causes Assess error code See corresponding
remote manual
1533060-N 21