Removing Relay
1.
Loosen fixation screw (5).
2.
Flip shroud (6) down.
3.
Loosen and remove both fixation screws.
4.
Remove relay (8)(9) including mountings (3)(10).
5.
Loosen five Allen screws (11) and remove screws
including washers and nuts form mountings.
6.
Replace relay.
When disassembling, take care of small parts
such as screws and washers. Put all small parts
down so that they can be reassembled in right
sequence.
Fig. 6-22
Refitting Relay
1.
Install parts in reverse order.
2.
Test all functions.
6.6.6 Replacing Carbon Brushes
This chapter refers to Storm
4
, Storm
4
X-plore and Storm
4
Max.
Always replace all carbon brushes on both motors.
DuraWatt motors are service-free, due to lifetime brushes.
CAUTION!
Risk of crushing
Mobility device is very heavy. Risk of injury to hands and feet.
– Use proper lifting techniques.
•
5 mm Allen key
•
6 mm Allen key
•
10 mm wrench (SSD motors only)
•
19 mm wrench
•
Flat screwdriver (large)
•
Oblong wooden blocks (at least 14 x 14 x 30 cm)
Removing Carbon Brushes
Fig. 6-23
1533060-N
37
Summary of Contents for Storm 4 Series
