Invacare® Storm⁴ Series
5.
Loosen screw
A
to remove washer
B
and headlight
with holder.
Fig. 6-101
6.
Loosen screw
C
to remove washer
D
and holder
E
with lamp bracket
F
.
7.
Take care of slot nut
G
inside rail.
Fig. 6-102
8.
Loosen nuts
I
to remove washers
H
and holder
E
from lamp bracket
F
.
9.
Replace holder.
Fig. 6-103
Installing Headlight Holder
1.
Install parts in reverse order.
2.
Install cables carefully and secure them with cable
clamps and tie wraps.
3.
Tighten screws finger-tight.
4.
Adjust headlight roughly using ratchet plate as a guide.
The user can carry out final adjustment following user
manual.
5.
Test all functions.
6.11.10 Replacing Rear Bulb (Conventional)
•
Size 2 Phillips screwdriver
1.
Loosen and remove Phillips screw (1).
2.
Remove glass.
3.
Replace defective bulb.
4.
Replace glass and tighten Phillips screw.
Fig. 6-104
It is not intended for an individual LED to be replaced. Replace the entire lighting unit as described in
Replacing Complete Rear Light (LED), page 86
84
1533060-N
Summary of Contents for Storm 4 Series
