Fig. 4-6
1.
Remove seat plate or sling seat (1). See Modulite service manual, “Adjusting seat width/backrest width” chapter.
2.
Loosen screws (2) in front and rear, left and right – DO NOT remove.
3.
Shift position of seat.
4.
Re-tighten screws.
5.
Install seat plate or sling seat.
4.4.2 One-Piece Seat Plate
•
6 mm Allen key
Fig. 4-7 This picture is an example.
1.
Remove seat plate (1) or sling seat. See Modulite service manual, “Adjusting seat width/backrest width” chapter.
2.
Loosen Allen screws (2) in front and rear, left and right – DO NOT remove.
3.
Shift position of seat frame.
4.
Re-tighten screws.
5.
Install seat plate again.
4.5 Adjusting seat tilt
4.5.1 Adjusting seat tilt on a seat with a manual tilt module (till Dec. 2010)
WARNING!
Danger of crushing
The seat/seat support is very heavy. Injury hazard to hands and feet.
– Use proper lifting techniques.
Tools:
•
6 mm Allen key
1533060-N
15
Summary of Contents for Storm 4 Series
