Each Easibrake kit should contain:
5
Retighten the brake clamp screws using the supplied
1# Easibrake unit (with left and right brake units,
allen key to secure the brake unit in position
cable and brake handle)
1# small bracket
1# large braket
1# bracket screw
1# spring washer
1# bracket nut
3# cable ties
2# allen keys
6
Repeat the previous steps for the left hand brake unit.
7
The brake handle can be installed either on the
1
Get the right hand brake unit
handgrip or wheelchair tubing. Position the brake
handle similar to as shown below:
2
Loosen the screws on the existing brake clamp using
the allen key supplied, as shownin the photograph
below:
8
Select either the small or large bracket to secure the
brake handle. Position and interlock the bracket with
the handle, as shown in the photograph below:
3
Remove the existing brake unit as shown below:
9
Using the screw, washer and nut; clamp together the
4
Replace with the Easibrake brake unit and position
brake handle and bracket using the supplied allen
the brake unit in the desired place as shown below:
key to secure.
10
Adjust the brake cable and reposition the brake units
if necessary to ensure effective braking. Then use the
Part code: Z15926
the cable ties to secure the cables to the chair frame
EASIBRAKE INSTALLATION INSTRUCTIONS
Installation instructions:
MEDICARE TECHNOLOGY LTD,
DALE HOUSE, ARMYTAGE ROAD, BRIGHOUSE, HD6 1PT.
TEL: +44 1484 401519 FAX: +44 1484 401498
