manualshive.com logo in svg

International Trucks ProStar+ Eagle Series., Operator'S Manual

The International Trucks ProStar+ Eagle Series Operator's Manual is an essential resource for truck operators, offering a comprehensive guide to using the product effectively and safely. Download this invaluable manual for free from our website manualshive.com today and enhance your knowledge of this advanced trucking solution.

Share
Download
background image

Table of Contents

Section 1 – Foreword

Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Cautions and Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Assistance Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Component Code Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Line Set Ticket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Vehicle Storage Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Storage Duration - One Month or Less. . . . . . . . . . . . . . . . . . . . . . .2
Storage Duration - Over One Month . . . . . . . . . . . . . . . . . . . . . . . . .3
Storage Facilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Exterior Noise Emissions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Tampering with Noise Control System Prohibited. . . . . . . . . . . . . . . .4
Emission Control Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Maintenance Record – Noise Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Reporting Safety Defects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

U.S. Registered Vehicles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Canadian Registered Vehicles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Safety Recalls and Authorized Field Changes. . . . . . . . . . . . . . . . . . .5
Customer Security Guide for International Trucks. . . . . . . . . . . . . . .6
Optional Diamond Logic® Electronic Application Solutions. . . . .8

Section 2 – Model Description

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Available Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Vehicle Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Vehicle Identification Number (VIN). . . . . . . . . . . . . . . . . . . . . . . . .12
Feature Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Engine Serial Number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Line Set Ticket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Exterior Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Cab Entry and Exit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Hood. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Raising the Hood. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Lowering the Hood. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Tilt-Away Bumper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Lowering the Tilt-Away Bumper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Raising the Tilt-Away Bumper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Luggage Box Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Driver and Passenger Side. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Chassis Skirts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Extended Chassis Skirts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Section 3 – Inspection Guide

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Tractor Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Exterior Lights Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Left Side Cab Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Left Engine Compartment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Left Front of Tractor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Front of Tractor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Right Front of Tractor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Right Engine Compartment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Right Side of Cab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Right Side Under Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Right Rear of Tractor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Rear of Tractor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Left Rear of Tractor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Fifth Wheel and Coupling Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

3878859R2

i

Summary of Contents for ProStar+ Eagle Series.








































































































































































































































































Reviews:

No comments

Related manuals for ProStar+ Eagle Series.

Powermate Aluminum LE Series Operating Manual preview
Aluminum LE Series
Brand: Powermate Pages: 54
Komatsu HM400-2 Brochure preview
HM400-2
Brand: Komatsu Pages: 6
Adam Equipment PTS 2000 Instructions Manual preview
PTS 2000
Brand: Adam Equipment Pages: 20
Jet JTX-2748 Operating Instructions And Parts Manual preview
JTX-2748
Brand: Jet Pages: 16
Vestil EPT Series Operation And Maintenance Manual preview
EPT Series
Brand: Vestil Pages: 20
Southworth PT-33-E Maintenance Manual & Operator Instructions preview
PT-33-E
Brand: Southworth Pages: 34

Brands by name

Popular brands

Load more brands