manualshive.com logo in svg

International Trucks ProStar+ Eagle Series., Operator'S Manual

The International Trucks ProStar+ Eagle Series Operator's Manual is an essential resource for truck operators, offering a comprehensive guide to using the product effectively and safely. Download this invaluable manual for free from our website manualshive.com today and enhance your knowledge of this advanced trucking solution.

Share
Download
background image

Operation

NOTE: When attempting to readjust/slide the position of the
tractor fifth wheel or the trailer’s tandem axles with the tractor
and trailer fully connected, leave the tractor’s PARKING BRAKE
pushed in and pull the TRAILER AIR SUPPLY out. This will
apply the trailer’s parking brakes and keep it stationary while
the tractor is moved forward or reverse.

Parking Brake Indicator

WARNING

Driving with the parking brakes applied can lead
to excessive heat build up and fire resulting in
property damage, personal injury, or death.

The Parking Brake indicator is operated in conjunction with the
parking brake. With the ignition switch on and the Parking brake
set, the PARK indicator will illuminate.

If the indicator does

not illuminate with the Parking brake set, the indicator may be
inoperative.

Bobtail Proportioning System

Bobtail proportioning is available with tractor air brake systems
(for export only with code 04092) with or without ABS or
ABS/Traction Control Systems. The proportioning valve senses
when trailer brakes are not connected to the vehicle air brake
system, and automatically adjusts rear braking power when
operating in the bobtail mode, then returns full braking power
when a trailer is attached.

When operating in the bobtail

mode, bobtail proportioning provides more braking control and
shorter stopping distances, particularly on wet and slippery road
surfaces.

It should be noted that there is a noticeably different brake pedal
feel on tractors with this feature while operating in the bobtail
mode. Higher brake pedal efforts will be experienced by the
driver than when in a brake system without bobtail proportioning.

3878859R2

157

Summary of Contents for ProStar+ Eagle Series.








































































































































































































































































Reviews:

No comments

Related manuals for ProStar+ Eagle Series.

Jungheinrich ese 20 Operating Instructions Manual preview
ese 20
Brand: Jungheinrich Pages: 53
Komatsu HM400-1 Brochure preview
HM400-1
Brand: Komatsu Pages: 5
RAM Commercial PROMASTER 2022 Owner'S Manual preview
PROMASTER 2022
Brand: RAM Commercial Pages: 284
JAC HFC1061 Owner'S Manual preview
HFC1061
Brand: JAC Pages: 56
Noblelift HPT20S User Manual preview
HPT20S
Brand: Noblelift Pages: 19
Labrie Automizer Versa Hand Maintenance Manual preview
Automizer Versa Hand
Brand: Labrie Pages: 190
Vestil EPT Series Operation And Maintenance Manual preview
EPT Series
Brand: Vestil Pages: 20
Kleton Standard MJ484 Instruction Manual preview
Standard MJ484
Brand: Kleton Pages: 8
Kleton ML994 Instruction Manual preview
ML994
Brand: Kleton Pages: 8
Kleton MN059 Instruction Manual preview
MN059
Brand: Kleton Pages: 8
Steren k-688 Instruction Manual preview
k-688
Brand: Steren Pages: 27
OPTITEC Wireless Remote Control Wheel V3 Operator'S Manual preview
Wireless Remote Control Wheel V3
Brand: OPTITEC Pages: 11
Ford Cargo 2017 Owner'S Manual preview
Cargo 2017
Brand: Ford Pages: 240

Brands by name

Popular brands

Load more brands