International Trucks ProStar+ Eagle Series., Operator'S Manual

Page: 55 / 263

Controls/Features
SECTION 4 — CONTROLS/FEATURES
Introduction
General Information
The controls/features enable the driver to monitor and manage
the operation of the majority of the vehicle’s functions.
This
section describes and identifies various components within the
Overhead Console, Instrument Panel Gauge Cluster, Center
Dash Panel/Wing Panel, Steering Column and Switches,
Steering Wheel Controls, Door and Window Controls, Eaton
VORAD Collision Warning System, and Vehicle Information
Display.
Electrical
WARNING
This vehicle may be equipped from the factory
with electrical switches intended to operate
equipment
that was installed by a truck
equipment manufacturer (TEM). Instructions,
Cautions,
and Warnings for this additional
equipment will NOT be found in this manual.
Read and understand the appropriate manual
for the specific equipment in question before
operating. Failure to observe this warning may
cause property damage, personal injury, or death.
NOTE: This vehicle may be equipped with electronic, application
specific options not described in this Operator’s Manual. Many
of these features are supplied with rocker switches that have
custom labels applied. The presence of these options as factory
installed can be verified from the Line Set Ticket included with
the vehicle. A truck equipment manufacturer (TEM), however,
may have installed some of these options after production. In
that case, they will not appear on the Line Set Ticket. If installed
by a TEM, you should receive an operating guide and/or training
for the specific functions provided. Familiarize yourself with all of
the switches that control chassis, engine, and body equipment
and seek adequate training on the function of all features before
operating this vehicle.
Electrical System
The Electrical System provides a means to distribute the
electrical power and provide the driver with controls and
indications of vehicle performance. Unlike previous electrical
systems, this system uses multiplexing for connecting to major
functional areas of the truck with much less wiring. The system
is controlled by the Body Controller, which provides interfaces to
a majority of vehicle switches and sensors. The Body Controller
also communicates with the standard and optional system
controllers and modules in the vehicle.
3878859R2
43