manualshive.com logo in svg

International Trucks ProStar+ Eagle Series., Operator'S Manual

The International Trucks ProStar+ Eagle Series Operator's Manual is an essential resource for truck operators, offering a comprehensive guide to using the product effectively and safely. Download this invaluable manual for free from our website manualshive.com today and enhance your knowledge of this advanced trucking solution.

Share
Download
background image

Index

S

(CONT.)

Sleeper Control Panel (cont.)

Manual Climate Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Power Receptacle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Radio Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Remote Power Inverter Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Sleeper Dome/Floor Light Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

Sleeper Curtain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Sleeper Dome/Floor Light Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Sleeper Fan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Sleeper HVAC Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176
SmartWave® Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
SmartWave® Tire Pressure Monitoring System (TPMS). . . . .202
Speakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Stability Control Systems – Bendix® RSP/WABCO RSC/Bendix

ESP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160

Starting Procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123

After the Engine Starts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Cold Weather. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125

Cold Weather Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Cold Weather Starting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
Engine Idle Shutdown Timer (Optional). . . . . . . . . . . . . . . . . . .127
Engine Idling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Winter Front Usage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127

Emergency Starting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Engine Shutdown. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Engine Starting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
Hot Weather Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127

Steering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128, 198

Adjustable Steering Column. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129
Lubrication Points. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199
Power Steering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199

S

(CONT.)

Steering (cont.)

Tightening Steering Intermediate Shaft Joint Bolts. . . . . . . .198

Steering Column and Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Steering Wheel Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

Cruise Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Storage Duration - One Month or Less. . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Storage Duration - Over One Month. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Storage Facilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Supporting Your Vehicle for Service. . . . . . . . . . . . . . . . . . . . . . . . . . . .173
Suspension (Air and Steel Springs). . . . . . . . . . . . . . . . . . . . . . . . . . . .197

Front Suspension. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197
Rear Suspension. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198

Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75, 82

Courtesy Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Daytime Running Lights (DRL). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Dome Lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Headlights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Lights On With Wipers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Panel Lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Park Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

System Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

T

Tampering with Noise Control System Prohibited. . . . . . . . . . . . . . . .4
Tandem Axle Power Divider Lock (PDL) Control. . . . . . . . . . . . . .149
Television Mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Terminal Inspection-Cleaning-Corrosion Protection. . . . . . . . . .185
Three-Position Regeneration Inhibit Switch. . . . . . . . . . . . . . . . . . .142
Tightening Steering Intermediate Shaft Joint Bolts. . . . . . . . . . .198
Tilt-Away Bumper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Lowering the Tilt-Away Bumper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

246

3878859R2

Summary of Contents for ProStar+ Eagle Series.








































































































































































































































































Reviews:

No comments

Related manuals for ProStar+ Eagle Series.

SAC 3600 Series Operator'S Manual preview
3600 Series
Brand: SAC Pages: 134
Ravas RPW EL Operation Manual preview
RPW EL
Brand: Ravas Pages: 4
Komatsu HD465-8 Operation & Maintenance Manual preview
HD465-8
Brand: Komatsu Pages: 420
SAF-HOLLAND FW6170 Maintenance And Operating Instructions preview
FW6170
Brand: SAF-HOLLAND Pages: 15
Still FXH 20 Original Instructions Manual preview
FXH 20
Brand: Still Pages: 140
Volvo FH12 LHD Wiring Diagram preview
FH12 LHD
Brand: Volvo Pages: 128
swaploader SL-400 Parts And Operation Manual preview
SL-400
Brand: swaploader Pages: 136
HANGCHA CBD20-AEC1 Operation And Maintenance Manual preview
CBD20-AEC1
Brand: HANGCHA Pages: 96
ep EPT18- EHJ Operation Manual preview
EPT18- EHJ
Brand: ep Pages: 36
ep EPT20-13ET Operation Manual preview
EPT20-13ET
Brand: ep Pages: 38
DAF CF65 Service Manual preview
CF65
Brand: DAF Pages: 352
U-Line H-5484 Quick Start Manual preview
H-5484
Brand: U-Line Pages: 9

Brands by name

Popular brands

Load more brands