manualshive.com logo in svg

International Trucks ProStar+ Eagle Series., Operator'S Manual

The International Trucks ProStar+ Eagle Series Operator's Manual is an essential resource for truck operators, offering a comprehensive guide to using the product effectively and safely. Download this invaluable manual for free from our website manualshive.com today and enhance your knowledge of this advanced trucking solution.

Share
Download
background image

Table of Contents

Lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97

Dome Light. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Reading Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Floor Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Accent Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97

Sleeper Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Accent Light Dimmer Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Accent Light Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Sleeper Dome/Floor Light Switch. . . . . . . . . . . . . . . . . . . . . . . . . . .99
Engine Control Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Manual Climate Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Electronic Climate Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Power Receptacle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Radio Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Remote Power Inverter Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

Bunk Restraint System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Adjustable Belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Restraint Webbing System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

Lower Bunk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

Upper Bunk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
Entering The Upper Bunk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Exiting The Upper Bunk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Cabinets/Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Cabinets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

Refrigerator Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

Horizontal Refrigerator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Dresser Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Tower Wardrobe Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Rear Wardrobe Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Airline Cabinets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

Convenience Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Sleeper Curtain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Television Mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Power Inverter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Power Sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Speakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Floor Covering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Sleeper Fan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

Section 6 – Operation

Operation Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Cab Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

Seat Belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Care of Seat Belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

Seats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121

Starting Procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
Engine Starting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
After the Engine Starts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Engine Shutdown. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124

3878859R2

iii

Summary of Contents for ProStar+ Eagle Series.








































































































































































































































































Reviews:

No comments

Related manuals for ProStar+ Eagle Series.

Paccar Kenworth C500 2012 Manual preview
Kenworth C500 2012
Brand: Paccar Pages: 276
Sealey CST985.V3 Instructions preview
CST985.V3
Brand: Sealey Pages: 2
Granit 76072170 Operating Instructions Manual preview
76072170
Brand: Granit Pages: 24
Blue Ox Torrent BX7540P Operator'S Manual & Installation Instructions preview
Torrent BX7540P
Brand: Blue Ox Pages: 6
U-Line H-4564 Manual preview
H-4564
Brand: U-Line Pages: 62
Taylor-Dunn 212037 Operator'S Manual preview
212037
Brand: Taylor-Dunn Pages: 52

Brands by name

Popular brands

Load more brands