manualshive.com logo in svg

International Trucks ProStar+ Eagle Series., Operator'S Manual

The International Trucks ProStar+ Eagle Series Operator's Manual is an essential resource for truck operators, offering a comprehensive guide to using the product effectively and safely. Download this invaluable manual for free from our website manualshive.com today and enhance your knowledge of this advanced trucking solution.

Share
Download
background image

Index

C

(CONT.)

Cabinets (cont.)

Dresser Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Horizontal Refrigerator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Rear Wardrobe Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Refrigerator Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Tower Wardrobe Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

Cabinets/Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Canadian Registered Vehicles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Care of Seat Belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
Care of Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182

Bright Metal Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
Exposed Rubber and Unpainted Plastic Parts. . . . . . . . . . . . . .182
Upholstery Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
Washing and Waxing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182

Cautions and Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Center Dash Panel/Wing Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Climate Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Air Conditioning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Dehumidification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

Gauges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

Certified Clean Idle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
Charge Air Cooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
Charge Air Cooler And Radiator Core Inspection And

Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192

Inspection and Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192

Chassis Lubrication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173
Chassis Skirts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Extended Chassis Skirts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

C

(CONT.)

Checking Inflation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
Circuit Breakers, Fuses and Fusible Links. . . . . . . . . . . . . . . . . . . . .131
Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197
Climate Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Air Conditioning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Dehumidification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

Clutch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183

Hydraulic Clutch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Pedal Free Travel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183

Clutch Brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
Clutch Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
Cold Weather. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125

Cold Weather Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Cold Weather Starting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
Engine Idle Shutdown Timer (Optional). . . . . . . . . . . . . . . . . . . . .127
Engine Idling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Winter Front Usage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127

Cold Weather Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Cold Weather Starting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
Compass Declination Zone Set Procedure. . . . . . . . . . . . . . . . . . . . . .57
Compass Directional Calibration Procedure. . . . . . . . . . . . . . . . . . . .60
Component Code Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Line Set Ticket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Components Requiring Fluid Check and Fill. . . . . . . . . . . . . . . . . .219
Components Requiring Lubrication. . . . . . . . . . . . . . . . . . . . . . . . . . . . .218
Connecting/Disconnecting a Trailer to a Vehicle with Air

Suspension. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166

Convenience Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

Floor Covering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Power Inverter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Power Sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

3878859R2

237

Summary of Contents for ProStar+ Eagle Series.








































































































































































































































































Reviews:

No comments

Related manuals for ProStar+ Eagle Series.

Daimler Trucks North America Freightliner Manual preview
Freightliner
Brand: Daimler Trucks North America Pages: 98
Rail-Ability SUPER BOSS Rail Operations & Emergency Recovery Procedures preview
SUPER BOSS
Brand: Rail-Ability Pages: 14
Reese 30923 Product Instructions preview
30923
Brand: Reese Pages: 7
Innoquest GoTow 36520 Product Manual preview
GoTow 36520
Brand: Innoquest Pages: 12

Brands by name

Popular brands

Load more brands