manualshive.com logo in svg

International Trucks ProStar+ Eagle Series., Operator'S Manual

The International Trucks ProStar+ Eagle Series Operator's Manual is an essential resource for truck operators, offering a comprehensive guide to using the product effectively and safely. Download this invaluable manual for free from our website manualshive.com today and enhance your knowledge of this advanced trucking solution.

Share
Download
background image

Index

A

(CONT.)

Axles (cont.)

Front Axle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176

Alignment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177
Inspection and Lubrication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176
Normal Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177

Locking Differential. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178
Rear Axle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177

Inspection and Lubrication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177

B

Base Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184
Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
Battery Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185
BATTERY ON Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
Bobtail Proportioning System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Body. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196
Brake Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
Brakes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151, 178

ABS Connections and Sensors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
Air Brakes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152, 179

Air Gauge, Low Air Pressure Beeper and Warning

Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153

Brake Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
Inspection and Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
Reservoir Moisture Draining. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153

Air Dryer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155, 180

Desiccant Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181
Heater. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181
Purge Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181

Air Reservoir/Tanks Moisture Draining. . . . . . . . . . . . . . . . . . . . . .181

B

(CONT.)

Brakes (cont.)

Antilock Brake System (ABS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158

ABS Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
ABS Self Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Antilock Driving Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

Bobtail Proportioning System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Downhill Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152
Parking Brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154

Parking Brake Alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Parking Brake Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155

Parking Brake Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Trailer Air Supply and Parking Brake Modular Controls. . . .156
Trailer Brake Hand Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155

Bright Metal Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
Bunk Restraint System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

Adjustable Belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Restraint Webbing System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

C

Cab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182

Care of Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182

Bright Metal Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
Exposed Rubber and Unpainted Plastic Parts. . . . . . . . . . .182
Upholstery Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
Washing and Waxing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182

Cab Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Cab Doors and Locks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
Cab Entry and Exit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Cab Interior Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Cabinets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

Airline Cabinets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

236

3878859R2

Summary of Contents for ProStar+ Eagle Series.








































































































































































































































































Reviews:

No comments

Related manuals for ProStar+ Eagle Series.

Labrie ALLEY -GATOR RIGHT-HAND Maintenance Manual preview
ALLEY -GATOR RIGHT-HAND
Brand: Labrie Pages: 108
Daimler Trucks North America Freightliner Manual preview
Freightliner
Brand: Daimler Trucks North America Pages: 98
Komatsu HD785-5 Operation & Maintenance Manual preview
HD785-5
Brand: Komatsu Pages: 307
ep CQD12SSD Operation Manual preview
CQD12SSD
Brand: ep Pages: 44
Kässbohrer Reefer 2023 Series User Manual preview
Reefer 2023 Series
Brand: Kässbohrer Pages: 72
U-Line MAGLINER H-1054 Quick Start Manual preview
MAGLINER H-1054
Brand: U-Line Pages: 2
Trane Thermo King TriPac EVOLUTION Installation Manual preview
Thermo King TriPac EVOLUTION
Brand: Trane Pages: 96
U-Line H-1826 Manual preview
H-1826
Brand: U-Line Pages: 6

Brands by name

Popular brands

Load more brands