manualshive.com logo in svg

International Trucks ProStar+ Eagle Series., Operator'S Manual

The International Trucks ProStar+ Eagle Series Operator's Manual is an essential resource for truck operators, offering a comprehensive guide to using the product effectively and safely. Download this invaluable manual for free from our website manualshive.com today and enhance your knowledge of this advanced trucking solution.

Share
Download
background image

Index

SECTION 10 — INDEX

A

ABS Connections and Sensors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
ABS Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
ABS Self Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Accent Light Dimmer Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Accent Light Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Accent Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Accessory Feed Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186
Additional Unsafe Practices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137
Adjustable Belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Adjustable Steering Column. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129
After the Engine Starts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Air Brakes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152, 179

Air Gauge, Low Air Pressure Beeper and Warning

Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153

Brake Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
Inspection and Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
Reservoir Moisture Draining. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153

Air Cleaner Element Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189
Air Compressor Cycling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
Air Conditioning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Air Conditioning Service Checks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174

Front Access HVAC Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175
HVAC Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
Recirculation Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175
Side Access HVAC Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
Sleeper HVAC Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176

Air Dryer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155, 180

Desiccant Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181
Heater. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181

A

(CONT.)

Air Dryer (cont.)

Purge Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181

Air Gauge, Low Air Pressure Beeper and Warning

Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153

Air Induction System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187
Air Intake System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196
Air Reservoir/Tanks Moisture Draining. . . . . . . . . . . . . . . . . . . . . . . . .181
Air Restriction Gauge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188
Air Suspension System Faults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151
Airline Cabinets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Alignment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177
Alternator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
Antifreeze. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194
Antilock Brake System (ABS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158

ABS Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
ABS Self Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Antilock Driving Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

Antilock Driving Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Assistance Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
ATC OFF ROAD or MUD/SNOW Switch. . . . . . . . . . . . . . . . . . . . . . .160
ATC System Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160
Automatic Door Lock Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Automatic Traction Control (ATC) System. . . . . . . . . . . . . . . . . . . . . .159

ATC OFF ROAD or MUD/SNOW Switch. . . . . . . . . . . . . . . . . . . .160
ATC System Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160
Stability Control Systems – Bendix® RSP/WABCO

RSC/Bendix ESP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160

Available Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Axles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176

3878859R2

235

Summary of Contents for ProStar+ Eagle Series.








































































































































































































































































Reviews:

No comments

Related manuals for ProStar+ Eagle Series.

YAPAR YPT25 Operator'S Manual preview
YPT25
Brand: YAPAR Pages: 16
EP Equipment CQD15S Operation Manual preview
CQD15S
Brand: EP Equipment Pages: 46
Rail-Ability Komatsu D41 Series Operator'S Manual preview
Komatsu D41 Series
Brand: Rail-Ability Pages: 34
Volvo VHD 2003 Service Manual preview
VHD 2003
Brand: Volvo Pages: 68
DAF CF65 Service Manual preview
CF65
Brand: DAF Pages: 352

Brands by name

Popular brands

Load more brands